Production of Fly ash/Chitosan composites aimed for heavy metal adsorbents
Session
Agriculture, Food Science and Technology
Description
The processes of generation, management, treatment and disposal of fly ash industrial waste particles all over the world have been considered as serious issues of solid waste. The subject of this research work was to produce and to characterize the Fly ash/Chitosan composites aimed for heavy metal adsorption in polluted waters. Three different types of fly ash waste particles were used, two types supplied from EURONICKEL and one supplied from OSLOMEJ, Macedonia. The surface of the fly ash (FA) particles was modified by treated with nitric acid (HNO3). Several types of composite adsorbents were produced using the chitosan as a polymer matrix. The characterization of the metallurgical waste particles was performed by XRF, XRD, TGA, SEM and FTIR analysis, while the obtained composites were tested by TGA, SEM and FTIR analysis. It was observed that the structure, morphology, and some other characteristics of FA particles have been significantly changed after treatment with chitosan and it is expected that it will improve their adsorption capacity of heavy metal ions.
Keywords:
Fly ash, Chitosan, Composites, Production, Characterization
Proceedings Editor
Edmond Hajrizi
ISBN
978-9951-550-50-5
Location
UBT Kampus, Lipjan
Start Date
29-10-2022 12:00 AM
End Date
30-10-2022 12:00 AM
DOI
10.33107/ubt-ic.2022.326
Recommended Citation
Osmani, Egzona; Dimitrievska, Iva; Paunovic, Perica; and Grozdanov, Anita, "Production of Fly ash/Chitosan composites aimed for heavy metal adsorbents" (2022). UBT International Conference. 335.
https://knowledgecenter.ubt-uni.net/conference/2022/all-events/335
- Usage
- Abstract Views: 10
Production of Fly ash/Chitosan composites aimed for heavy metal adsorbents
UBT Kampus, Lipjan
The processes of generation, management, treatment and disposal of fly ash industrial waste particles all over the world have been considered as serious issues of solid waste. The subject of this research work was to produce and to characterize the Fly ash/Chitosan composites aimed for heavy metal adsorption in polluted waters. Three different types of fly ash waste particles were used, two types supplied from EURONICKEL and one supplied from OSLOMEJ, Macedonia. The surface of the fly ash (FA) particles was modified by treated with nitric acid (HNO3). Several types of composite adsorbents were produced using the chitosan as a polymer matrix. The characterization of the metallurgical waste particles was performed by XRF, XRD, TGA, SEM and FTIR analysis, while the obtained composites were tested by TGA, SEM and FTIR analysis. It was observed that the structure, morphology, and some other characteristics of FA particles have been significantly changed after treatment with chitosan and it is expected that it will improve their adsorption capacity of heavy metal ions.